Amonics’ High Power EDFA series offers eye-safe, single mode fiber amplifier. This high-power EDFA platform is widely used as a reliable optical amplifier in research environments where thermal stability, spectral integrity, and repeatable performance are critical — particularly in hollow-core fiber characterization and space optical communication research.
The turnkey microprocessor-controlled EDFAs provide illustrative alarms and status indicators. An integrated RS232 computer interface enables easy control, diagnostic functions and data acquisition.
| AEDFA-45 | |
|---|---|
| Mode of Operation | CW Mode |
| Saturated Output Power | Min. 28 W, Typ. 30 W |
| Input Wavelength | 1545 nm to 1565 nm |
| Input Signal Level | 0 to +13 dBm |
| Noise Figure (at 0dBm input signal, 1550nm) | Max 6.5 dB |
| Input & Output Isolation | Min. 30 dB |
| Polarization Dependent Gain | Typ. 0.3 dB, Max. 0.5 dB |
| Polarization Mode Dispersion | Typ. 0.3 ps, Max. 0.5 ps |
| Control Mode | ACC, APC (optional) |
| unit | value | |
|---|---|---|
| Operation Temperature | °C | 0 to 40 |
| Storage Temperature | °C | -10 to 70 |
| Power Supply | VAC | 90 – 240, 47 – 63Hz |
| Dimensions | mm | 485(W) x 360(D) x 90(H) or 485(W) x 515(D) x 90(H) |
| Mechanical Safety Control | Key-lock switch, BNC interlock key | |
| Optical Power Monitoring | Output power, Input power (optional) | |
| Remote Control Port | DB-9 female (RS232), Control software included RJ-45 (TCP/IP Ethernet) (optional) | |
| Protection | Pump Laser (TEC) Overheat, Loss of Input Signal, Output Power Protection | |
| Optical Input / Output Tap Port | FC/APC Receptacle | |
| Optical Output Terminal | Min. 1m 3mm PVC cable | |
| Optical Fiber | SMF-28 |
| Product Code |
|---|
| AEDFA-aa-R-bb |
| aa: Saturated output power in dBm |
| bb: NC for bare fiber, CL for collimator |
| Fiber coupled output up to 30W |
| Eye-safe wavelength in 1550nm range |
| Narrow linewidth operation |
| Turnkey device |
| RS232/Ethernet interface |